Alfa Romeo Brera

ALFA ROMEO BRERA – SERVICE INTERVALS, ENGINE OIL

Read Time:2 Minute, 56 Second

ALFA ROMEO BRERA 939 2005-2008 – SERVICE INTERVALS, ENGINE OIL

Years of productionEngine oil viscosityThe amount of engine oilToothed beltAir filterBrake fluidMotor oilCabin filterCabin filter
Alfa Brera 2.2 JTS 16V 185HP
Alfa Brera 3.2 JTS V6 24V 260HP2006 – 2008 5.4 l
Alfa Brera 2.4 JTDM 20V 200HP2006 – 2008 6.4 l150,000 km / 5 years30000 km60,000 km / 2 years 30,000 km / 2 years
Alfa Brera 2.4 JTDM 20V 210HP2007 – 2008 6.4 l150,000 km / 5 years30000 km60,000 km / 2 years 30,000 km / 2 years

ALFA ROMEO BRERA 939 FACELIFT 2008-2011 – SERVICE INTERVALS, ENGINE OIL

GenerationThe amount of engine oilToothed beltAir filterCandlesBrake fluidMotor oilCabin filter
Alfa Brera 1.75 TBi 200HP
Alfa Brera 2.2 JTS 16V 185HP2008 – 20105.4 л 35000 km105000 km35000 km / 2 years35000 km / 2 years35000 km / 2 years
Alfa Brera 3.2 JTS V6 24V 260HP2008 – 20115.4 л 35000 km105000 km35000 km / 2 years35000 km / 2 years35000 km / 2 years
Alfa Brera 2.0 JTDM 16V 170HP2009 – 20114.9 л140,000 km / 5 years 35000 km / 2 years 35000 km / 2 years
Alfa Brera 2.4 JTDM 20V 200HP2008 – 20106.4 l140,000 km / 5 years35000 km 35000 km / 2 years 35000 km / 2 years
Alfa Brera 2.4 JTDM 20V 210HP2008 – 20116.4 l140,000 km / 5 years35000 km 35000 km / 2 years 35000 km / 2 years

ALFA BRERA – VEHICLE RECALL AND BREAKDOWNS

  • ALFA ROMEO BRERA (01/06/2006 – 31/08/2006) FAULT: The reflective heat shield may be incorrectly installed or missing. This can lead to damage to the power steering tube and loss of brake assist servo.
    • Solution : Recall vehicles that are likely to be affected to ensure proper placement of the reflective casing.
  • ALFA ROMEO BRERA (November 20, 2007 – November 22, 2007) FAULT: Due to the possibility of failure in the production process, the flexible rubber brake hoses may not have been properly vulcanized. As a consequence, the internal flow of the brake hydraulic fluid may be partially or completely restricted. If this happens, there will be a reduction in efficiency during braking.
    • Solution : Recall the vehicle to check the hoses to determine if they are in the affected series. If this is the case, they will be replaced with guaranteed quality items.
  • ALFA ROMEO BRERA (November 1, 2005 – February 28, 2007) FAULT: Oil may leak from the Power Take Off Unit which may cause the unit to block and possible loss of control of the vehicle.
    • Solution : Recall the affected vehicles to fit the seal to the core plug and install the bracket.
  • ALFA ROMEO BRERA (01.01.2007. – 29.02.2008.) FAULT: The brake pedal can be stiff when pressed, which requires more effort from the driver to stop the vehicle as a result of insufficient braking assistance caused by low vacuum at low engine speed while at high altitude immediately after starting.
    • Solution : Recall the vehicle to install an electric vacuum pump to supplement the engine vacuum system.
Happy
Happy
0 %
Sad
Sad
0 %
Excited
Excited
0 %
Sleepy
Sleepy
0 %
Angry
Angry
0 %
Surprise
Surprise
0 %

Average Rating

5 Star
0%
4 Star
0%
3 Star
0%
2 Star
0%
1 Star
0%

Leave a Reply

Your email address will not be published.

Alfa Romeo 4C Previous post ALFA ROMEO 4C – ENGINE OIL
audi a1 Next post Audi A1 – service intervals, engine oil